EPOX EP-6VBA Specifications download pdf (Page 35)

BIOS

EP-6VBA

Page 4-7

The default is 250.

250: 250 msec.

500: 500 msec.

750: 750 msec.

1000: 1000 msec.

Security Option:

This category allows you to limit access to the System and Setup, or just to

Setup.

The default is Setup.

System: The system will not boot and the access to Setup will be denied if

the correct password is not entered at the prompt.

Setup: The system will boot; but the access to Setup will be denied if the

incorrect password is not entered at the prompt.

PCI/VGA Palette Snoop:

This field controls the ability of a primary PCI VGA controller to share a

common palette (When a snoop write cycles) with an ISA video card.

The default is Disabled.

Enabled: If an ISA card is connected to a PCI VGA card via the VESA

connector, and that ISA card connects to a VGA monitor, then that

ISA card uses the RAMDAC of the PCI card.

Disabled: Disables the VGA card Palette Snoop function.

OS Select For DRAM > 64MB:

Some operating systems require special handling. Use this option only if your

system has greater than 64MB of memory.

The default is Non-OS2.

OS2: Select this if you are running the OS/2 operating system with

greater than 64MB of RAM.

Non-OS2: Select this for all other operating systems and configurations.

Video BIOS Shadow:

This option allows video BIOS to be copied into RAM. Video Shadowing will

increase the video performance of your system.

The default is Enabled.

Enabled: Video shadow is enabled.

Disabled: Video shadow is disabled.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 68 69

No comments

EPOX EP-6VBA Specifications Page 35