Installation
Page 3-4
<Figure 3>
Step 4
Apply thermal compound to the top of
the CPU and install the heatsink as
shown.
Step 5
Install the cooling fan assembly. Press
the two clips in the direction of the
arrows shown in Figure 5 to secure the
assembly to the CPU socket.
Step 6
Plug the CPU fan power into the
mainboard’s CPU fan connector.
The installation is complete.
<Figure 4>
<Figure 5> <Figure 6>
NOTES:
• Installing with incorrect CPU fan and heatsink assemblies may damage
the Intel Pentium
®
CPU. Use Intel’s design thermal solution shown in the
illustrations above: an active heatsink; an extruded aluminum heatsink
base; and a fan attached to the top of the fin array.
• Apply heatsink thermal compound or paste to the CPU to avoid CPU
overheating and damage.
• In accordance with Intel guidelines specifications, do not install a CPU
over 50 times to avoid bending the pins and damaging the CPU.
Step 3
Close the socket by lowering and
locking the actuation lever.
Comments to this Manuals